Equipment Introduction
The Glass Bending Degree and Thickness Automatic Tester is a
specialized detection equipment designed and manufactured by Lonroy for automatically detecting the bending degree and thickness of
glass. This equipment has applied for a national utility model
patent, with the patent number: ZL202022245692.X. The equipment
uses an optical non-contact probe to scan the surface of the glass,
measure and calculate the bending degree and thickness values of
the glass, and simultaneously draw the bending degree curve and
thickness curve of the tested sample along the scanning direction.
The glass bending degree and thickness automatic tester is a
brand-new device for detecting the bending degree and thickness of
glass. The system mainly consists of the main structure, sample
table, moving module, optical unit, and control system.
System Features
1.Good repeatability, offline detection, and the ability to
repeatedly verify the glass bending degree and thickness data.
2.High stability, low equipment failure rate, and easy recovery
after a failure.
3.Good safety, with multiple safety protections set in the equipment.
4.Wide applicability, suitable for both factories and laboratories.
5.Wide testing range, this equipment is applicable for the bending
degree and thickness detection of various flat glass, and can
measure glass of different thicknesses.
Equipment Functions
1.Can display the bending degree curve of the tested sample, and
can detect the thickness at different positions of the glass.
2.Real-time display of sample test results, including the length of
the tested glass sample, thickness at different positions, the
percentage of the arc-shaped bending of the sample, and the maximum
arc-shaped bending position.
3.Can display the results of multiple tests.
4.Can save or read test data, automatically generate test reports,
and can be directly printed.
Glass Bending Degree and Thickness Automatic Tester Auto Glass
Curvature Thickness Testing Instrument
