ASTM D1052 ISO 5423 Shoe Sole Bending Resistance Test Machine SATRA
TM60 Bending Resistance Tester
Product Features
The bending resistance test of the shoe sole is conducted by
placing the strip-shaped test sample or the shoe sole on the
bending testing machine, ensuring that the cut edge is directly
above the center of the rotating shaft of the bending testing
machine. The test sample is then freely bent 90 degrees on the
shaft by the bending testing machine. After a certain number of
test cycles, the length of the cut edge of the test sample is
measured to evaluate the bending resistance performance of the test
sample based on the rate of the cut edge growth.
Reference Standards
GB/T2099-2007, ASTM-D1052, ISO-5423, SATRA TM60, HB-T2411, HG/T
2411, etc. Standards
Product Features
Surface treatment of the body: Utilize DuPont powder from the
United States and the electrostatic spraying process. After being
cured at a high temperature of 200℃, it ensures long-lasting color
stability without fading.
LED-SLD806 integrated display control box, menu-based operation
mode;
The position can be adjusted by clicking, and the test speed can be
adjusted as well；
The mechanical components are made of non-corrosive structural
aluminum and stainless steel materials.
Precise drive motor, runs smoothly and with low noise;
It has the functions of counting and timing with automatic stop.
The test can be stopped automatically once the set test value is
reached.
High-precision selected bearings ensure smooth and stable rotation,
with a long service life.
The mechanical components are made of non-corrosive structural
aluminum and stainless steel materials.
One-click fully automatic testing, with simple and convenient
operation.
Technical specifications
Additional test capacity | 6 shoe soles / 12 test samples |
Bend angle | 90 ± 2º |
Speed | Switchable from 0 to 100 revolutions per minute |
Curved shaft diameter | 10mm |
Controller | LED-SLD806 (with integrated display and control function) |
Drilling tool (diameter) | 2.5mm |
Test mode | The machine will automatically stop after reaching the test cycle |
Fixture feature | Capable of testing shoe soles and individual pieces |
Weight | 244.5 kg |
Body size | 500 × 610 × 550 mm |
Power Supply | 220V 50HZ |
