Fabric Inductive Electrostatic Tester Textile Induction Static
Electricity Test Machine
Introduction
The static properties of various textile raw materials and finished
products (including fibers, yarns, fabrics, carpets, decorative
fabrics) can be measured. It can also be used to measure the static
properties of other sheet-like materials such as paper, rubber,
plastics, and composite panels.
Compliant with standards
The testing standards such as GB/T 12703.1-2021.
Product Features
1. Large-screen color touch screen for operation display, with both
Chinese and English interfaces, and menu-based operation;
2. The specially designed high-voltage generation circuit ensures
continuous and linear adjustment within the range of -10kV to 0.
The high-voltage voltage value is displayed digitally, making the
high-voltage adjustment intuitive and convenient.
3. The high-voltage generation circuit adopts a fully enclosed
module structure. The electronic circuit is capable of achieving
high-voltage shutdown and startup, overcoming the drawback of
domestic similar products where the high-voltage generation circuit
is prone to causing sparking at the contacts. It is safe and
reliable to use.
4. The attenuation period of the static voltage can be selected
arbitrarily: from 1% to 99%.
5. The test can be conducted using either the timing method or the
pressure-stabilization method. The instrument directly displays the
instantaneous peak value, half-life value (or residual static
voltage value) and attenuation time during the high-voltage
discharge through a digital display. It automatically shuts off the
high voltage and the motor, making the operation very convenient.
6. Equipped with a dehumidification duct, the static electricity
half-life test can be conducted in the laboratory environment.
7. Equipped with a humidity sensor, it is convenient to observe the
stable state of humidity.
Technical Specification
Static voltage value measurement range | -10kV to 0 |
Half-life time range | 0 to 9999.99 seconds, with an error of ±0.1 second |
Sample disc rotation speed | 1400 revolutions per minute |
Discharge time | Adjustable from 0 to 999.9 seconds. (Standard requirement: 30
seconds ± 0.1 second) |
Discharge distance (needle-shaped electrode to sample) | 20mm |
Measuring distance (test probe to sample) | 15mm |
Sample size | 45mm × 45mm |
Humidity sensor testing range | 0%RH to 100%RH, accuracy: ±3% |
Power supply | 220V, 50HZ, 400W |
Dimensions | 900 * 600 * 1350 mm (Length × Width × Height) |
Weight | Approximately 110 kilograms |
